Samsung Galaxy Note II - AbyssN2 JB Kernel

[andreas02 1.338]

Update

AbyssN2 kernel 1.5.1 Final Stable Version by me for Samsung Rom - New Abyss CWM Touch Recovery 2.2.1

Set row i/o scheduler as default

Reverted all mm patches from 1.3.0 to 1.5.0

-Added:

mm: fix lost kswapd wakeup in kswapd:stop()

mm/vmstat.c: cache align vm_stat

mm:memory hotplug: check if pages are correctly reserved on a per-section basis

mm: reduce the amount of work done when updating min_free_kbytes

mm:vmscan: fix force-scanning small targets without swap

vmscan: clear ZONE_CONGESTED for zone with good watermark

vmscan: add shrink_slab tracepoints

vmscan: shrinker->nr_updates race and go wrong

vmscan: reduce wind up shrinker->nr when shrinker can't do work

vmscan: limit direct reclaim for high order allocations

vmscan: abort reclaim/compaction if compaction can proceed

mm:compaction: trivial cleanup in acct_isolated()

mm: change isolate mode from #define to bitwise type

mm:compaction: make isolate_lru_page() filter-aware

mm:zone_reclaim: make isolate_lru_page() filter-aware

mm:migration: clean up unman and move()

mm:compaction: allow compaction to isolate dirty pages

kswapd: avoid unnecessary rebalance after an unsuccessful balancing

kswapd: assign new_order and new_classzone_idx after wakeup in sleeping

mm:compaction: introduce sync-light migration for use by compaction

mm:vmscan: do not OOM if aborting reclaim to start compaction

vmscan: promote shared file mapped pages

vmscan: activate executable pages after first usage

mm: Fix PageHead when |CONFIG_PAGEFLAGS_EXTENDED

mm: test PageSwapBacked in lumpy reclaim

mm:vmscan: convert global reclaim to per-memcg LRU lists

cpusets: avoid looping when storing to mems_allowes if one node remains set

cpusets; stall when updating mems_allowed for mempolicy or disjoint nodemask

mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma

vmscan: fix initial shrinker size handling

Fix blocking allocations called very early during bootup

Added Abyss CMW touch recovery 2.2.1 (based on ClockworkMod 6.0.2.7)

-Fix reboot on backup/restore

-Added SoundBoost Volume menu

- Other fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Update

AbyssN2 kernel 1.6.0 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi Touch 2.2.2

Disabled Adaptivex governor

Reverted Interactive governor

Added EMMC bug fix

Added some wakelock bug fix

Updated Touch firmware

ext4: don't set I_flags in ext4_ioc_setflags

ext4: remove mb_groups before tearing down the buddy_cache

ext4: add ext4_mb_unload_buddy in the error path

ext4: don't trash state flags in ext4_ioc_setflags

ext4: add missing save_error_info() to ext4_error()

ext4: force ro mount if ext4_setup_super() fails

trace: Disable function tracing during suspend/resume and hibernation

locks: fix checking of fcntl_setrelease_argument

ARM_ clean up idle handlers

btree: fix tree corruption in btree_get_prev()

Updated Abyss CWM Touch recovery to 2.2.2

Other fix

Warning:

After installing the kernel, reboot the new recovery and empty the folder /data /.abyss that contains the settings.

Then re-enter the settings ...

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Update:

Changelog:

AbyssN2 kernel 1.7.0 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.2.6

Added 3.0.59 Linux patches

Removed binfmt_elf.c: use get_random_int() to fix entropy depleting

Removed random: entropy tweaks are all the range nowadays

Added ZenX governor

Added Nightmare governor (You must use a freq min => 100Mhz)

Lazy governor: Add SMOOTH_UI

mmc: core: Fix possible memory leak

random: prevent add_input from doing anything

sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire

nohz: remove ts->infidel checks before restarting the tick

nohz: remove update_ts_time_stat from tick_nohz_start_idle

nohz: remove nohz_cpu_mask

nohz: removed some debugging messages

nohz: fix update_ts_time_stat idle accounting

nohz: make idle/iowait counter update optional

Updated Abyss CWM Touch and Semi-Touch recovery to 2.2.5

- Repacked with AbyssN2 kernel 1.7.0

- Added Nightmare governor

- Added ZenX governor

Other fix

Warning:

After installing the kernel, reboot the new recovery and empty the folder /data /.abyss that contains the settings.

Then re-enter the settings ...

Post 1 ergänzt. Downloadlink wird nach erfolgreichem Upload ergänzt.

LG

Andreas

[andreas02 1.338]

Downloadlink zum AbyssN2 Kernel 1.7.0 ist nun verfügbar im ersten Post

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 1.7.1 Final Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.2.7

Added 3.0.60 Linux patches

Update to 4.7.3 12/12 Linaro Toolchain

Fix Audio bug for hdmi and mhl output

Set config Hz = 300

String.c ported from Linux 3.8

nohz/sched: delay going tickles when cpu is loaded

PM: Back off suspend if repeated attempts fail ->set interval to 10s

writeback: fix writeback cche thrashing

mm: writeback: every 500ms the writeback daemon kicks and flushes

Writeback; tuned more safe dirty_writeback_interval for wake/sleep

Lowmemorykiller: add screen on/off values

Optimize apply_slack for size and speed

Added Proportional Rate Reduction for TCP

Added network speed tweak

usb: fix endpoint-disabling for failed config changes

Configuration changed

Added Abyss CWM Full and Semi Touch Recovery 2.2.7:

In Sound Boost menu:

- Added Headset volume menu

- Added Speaker Volume Menu

Other Fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 1.8.1 Final Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.0

Changelog:

Added Touchboost on/off sysfs interface

Updated Abyssplug v2 governor

Updated Nightmare governor

Added sharpness sysfs interface

block: tuning CFQ, SIO Scheduler

Change toolchain from Linaro gcc 4.7.3 201212 to 201301

PM/ cpufreq: initialize the cpu field during conservative governor start

cpufreq: conservative: updated frequency when limits are relaxed

sched/fair: Add some serialization to the sched_domain load-balance walk

jump_label: if a key has already initialized, don't nop it out

jump_label: add arch_jump_label_trasform_static() to optimize non-live code updates

jump_label: initialize jump_label subsystem much earlier

jump_label: export jump_label_inc/jump_label_dec

jumo_label: provide jump_label_key initializer

jump_label: add a WARN() if jump label key count goes negative

perf, core: Rate limit perf_sched_events jump_label patching

Add Abyss CWM Full and Semi Touch Recovery 2.3.0:

- Added Touchboost Menu

- Added Sharpness Mode

- Removed Thunderbolt script

Oher fix

Added 3.0.61 Linux Patches

Updated the latest ROW scheduler

Updated AbyssPlug V2 governor

block: Add support for reinsert a dispatched req

block: Add API for urgent request handling

block: sysfs: allow nonsueusers to change i/o scheduler

staging: revert lowmemorykiller

staging: logger: hold mutex while removing reader

netfilter: xt_qtaguid: fix error exit that would keep a spinlock

netfilter: xt_qtaguid: Don't BUG_ON if create_if_tag_stat fails

netfilter: xt_qtaguid: remove AID_*dependecy for access control

netfilter: xt_qtaguid: extend iface stat to report control

ftrace: make recordmount.c handle __fentry__

lib/checksum.c: optimize do_csum a bit

Allow WIFI MAC change

Disabled Pass_ipv4_suspend in wifi driver: can save battery on sleep

Added Front buffer suspend draw delay sysfs interface

Disabled Serial i/o

Added O3 optimization and other

Tuning some schedulers

Added Abyss CWM Full and Semi Touch Recovery 2.2.8

Other fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 1.8.1 Final 1 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.0

Touchboost fix

Added Touchboost on/off sysfs interface

Updated Abyssplug v2 governor

Updated Nightmare governor

Added sharpness sysfs interface

block: tuning CFQ, SIO Scheduler

Change toolchain from Linaro gcc 4.7.3 201212 to 201301

PM/ cpufreq: initialize the cpu field during conservative governor start

cpufreq: conservative: updated frequency when limits are relaxed

sched/fair: Add some serialization to the sched_domain load-balance walk

jump_label: if a key has already initialized, don't nop it out

jump_label: add arch_jump_label_trasform_static() to optimize non-live code updates

jump_label: initialize jump_label subsystem much earlier

jump_label: export jump_label_inc/jump_label_dec

jumo_label: provide jump_label_key initializer

jump_label: add a WARN() if jump label key count goes negative

perf, core: Rate limit perf_sched_events jump_label patching

Add Abyss CWM Full and Semi Touch Recovery 2.3.0:

- Added Touchboost Menu

- Added Sharpness Mode

- Removed Thunderbolt script

Oher fix

Post 1 ergänzt

LG

Andreas

[Hoppel2580 6]

Version 1.9. 0 ist draußen.

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 1.9.0 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.1

Added 3.0.62 Linux Patches

Changed default i/o scheduler to VR

Update BFQ i/o scheduler to v6

busfreq: Added memory and Internal voltage control sysfs interface

Dynamically adjust cpufreq_max_limit according to scaling_max setting

Add frandom (dev/frandom): fast kernel number generator

cpufreq: fix memory leak with sysfs when stats table are freed

ext4: prevent kernel panic in case of uninitalized jinxed

worqueue: change BUG_ON to WARN_ON

worqueue: catch more locking problems with flush_work()

worqueue: skip nr_running sanity check in worker_enter_idle()

kernel: move REPEATE_BYTE definition into linux/kernel.h

word-at-a-time: make the interfaces truly generic

lib: add generic strnlen_user() function

lib: add generic strncpy_from user function

lib: fix generic strnlen_user for 32bit big endian machines

ARM: use generic strnlen_user and strncpy_from_user functions

ARM:7301/1: rename the T() macro to TUSER() to avoid namespace conflicts

switch the protection of percpu_counter list to spinlock

lib/vsprintf.c: "%#o",0 becomes '0' instead od '00'

lib/vsprintf.c: further optimize decimal conversion

lib/vsprintf.c: optimize division by 10 for small integers

lin/vsprintf.c: optimize division by 10000

lib/vsprintf.c: optimize put_dec_trnunc8()

lib/vsprintf.c: improve standard conformance of sscanf()

Updated Abyss CWM Full and Semi Touch recovery to v.2.3.1:

- Deleted Vibration menu

- Deleted Bus ASV Table menu

- Added Mif Voltage Table menu

- Added Int Voltage Table menu

- Added Screen off delay menu

Other Fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 1.9.1 Final Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.2

Added 3.0.63 Linux patches

AbyssplugV2: tune for performance

AbyssplugV2: set as default

Lib/vsprintf.c: reverts all commits (cause some sod)

sched.c: re-compute time-average nr_running on read

lockdep: fix oops in processing workqueue

Updated snappy compressor

Redeced wakelock in modem drivers

Touchscreen: suppress tsp_dvfs lock messages

netfilter:xt_qtaguid.c: allow tracking loopback

Added Abyss CWM Full and Semi Touch Recovery 2.3.2:

-added Battery power charge menu

-changed default governor

Modified S90abyss script

other fix

Post 1 ergänzt

LG

Andreas

[Hoppel2580 6]

Der neue ist gut aber verbraucht um einiges mehr Akku als die 1.9.0. Bin deshalb wieder zurück.

[andreas02 1.338]

Sorry...den Kernel gibt es nicht mal einen Tag und jeder der sich mit Kernels beschäftigt, weiß, dass man "Diesen" erst mal mehrere Tage nutzen sollte, damit sich das ganze System erst einmal "Einspielen" kann.

Wer weiß, vielleicht geht er ja nicht in den DS?!

Zudem ist es immer gut zu wissen, unter welchen Voraussetzungen der Kernel läuft. Mit welcher CR oder Stock?!? Aus deiner Signatur (HTC...) kann man es ja nicht erkennen.

So eine "Blankoaussage" hilft leider niemandem

LG

Andreas

[Hoppel2580 6]

Ich habe den Kernel mit der neuen Goa seit gestern laufen gehabt. Die gleiche Zeit hatte übrigens auch der 1.9.0 und beide Kernel liefen über Nacht. Deep sleep hat auch bei beiden wunderbar funktioniert. Nur hat der neue in 6 Stunden deep sleep 12% verbraucht wo der alte nur 4% verbraucht hatUnd bei mir hat ein Kernel noch nie mehrere Tage gebraucht um sich einzupendeln, wenn der Medien Scanner durch gelaufen ist bleibt mein Verbrauch auch nach mehren Tagen immer gleich.

[andreas02 1.338]

Jetzt wissen wir es.

Danke für die Info

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 2.0.0 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.3

Add 3.0.64 Linux patches

Touchboost disable as default

Revert to Pegasusq as default governor

Revert to Row as default scheduler

Added Exynos-mem official patch by Samsung

Governor Ondemand: fix wrong delay sampling rate

Governor Ondemandq: fix wrong delay sampling rate

scatterlist: add sg_alloc_table_from_pages function

scatterlist: atomic sg_mapping_iter() no longer needs disabled IRQs

lib/string.c: use glibc version

lib/memcopy.c: use glib version

Changed optimization and configuration

Re-added

kernel: move REPEATE_BYTE definition into linux/kernel.h

word-at-a-time: make the interfaces truly generic

lib: add generic strnlen_user() function

lib: add generic strncpy_from user function

lib: fix generic strnlen_user for 32bit big endian machines

ARM: use generic strnlen_user and strncpy_from_user functions

ARM:7301/1: rename the T() macro to TUSER() to avoid namespace conflicts

switch the protection of percpu_counter list to spinlock

lib/vsprintf.c: "%#o",0 becomes '0' instead od '00'

lib/vsprintf.c: further optimize decimal conversion

lib/vsprintf.c: optimize division by 10 for small integers

lin/vsprintf.c: optimize division by 10000

lib/vsprintf.c: optimize put_dec_trnunc8()

lib/vsprintf.c: improve standard conformance of sscanf()

Added Abyss CWM Full and Semi Touch recovery 2.3.3

Other fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Im ersten Post habe ich das Abyss Kernel Setting Tool hinzugefügt.

Abyss Kernel Setting Tools!

[simple Introduce]

This app is AbyssN2 JB kernel setting tools application.

AbyssN2 kernel means that angelom's GalaxyNote2 custom kernel.

AbyssN2 kernel has developed by angelom.

Thanks to angelom. (It's very nice kernel to me)

[supported Android]

* Android version 4.0 or higher

* Requires ROOT and BUSYBOX

* Requires AbyssN2 JB Kernel installed

* Supported Languages : English, Korean

[Warnning]

That occurs while using this application developer are not responsible for any problems.

Using this program means that you agree with the statement above. Own Your Risk!

Download und Originalthread

LG

Andreas

[andreas02 1.338]

Update

Changelog:

AbyssN2 kernel 2.0.1 Final Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.4

Added 3.0.65 Linux Patches

Added 3.0.66 Linux Patches

Fixed frequencies scaling issue

Fixed Abyssplug V2 core 1 off issue

Fixed wifi battery drain when screen is off

rtc: forcefully set register twice

lowmemorykiller: when the screen is off exclude closing of some processes

blk: fix wrong idr_pre_get() error check in loop.c

loop: limit the number of requests in the bio list

Added Abyss CWM Full and Semi Touch Recovery 2.3.4

- Added 5db steps for Headset and Speaker Volume

Other Fix

Post 1 ergänzt

LG

Andreas

[andreas02 1.338]

Das Abyss Kernel Tool hat auch wieder ein Update

Changelog:

[27/02/2013 Ver 0.93]

Custom CPU voltage controls features added.

This voltage control features are a lot different than the other tools.

Settings of two voltage units.

Temporary apply. Continued Apply. Etc.

Try use it!

Post 1 ergänzt

LG

Andreas

[Hoppel2580 6]

Update des Kernels auf 2.1.0 ist draußen!

[andreas02 1.338]

Wie durch Hoppel2580 erwähnt

Changelog:

AbyssN2 kernel 2.1.0 Stable Version by me for Samsung Rom - New Abyss CWM Recovery Full or Semi-Touch 2.3.5

Added 3.0.67 Linux Patches

Added optimized CRC32 algorithm

rwsem: implement writer lock-stealing for better scalability

cfq-iosched: fix null pointer deference

sched.rt: fix isolated CPUs leaving root_task_group

Ported new Nightmare governor

Changed some cpu voltages

base: include seq_file.h in sync.h

sync: don't log wait timeouts when timeout=0

sync: add tracepoint support

sync: refactor sync_debug printing

sync: improve timeout dumps

sync: dump sync state to console on timeout

sync: dump sync state of fence errors

sync: optimize fence merges

sync: export sync API symbols

sync: add internal refcounting to fences

sync: allow async waits to be canceled

Disabled most debug

Changed configuration

Added Abyss CWM Full and Semi Touch Recovery 2.3.5

Other fix

Post ergänzt

LG

Andreas