Samsung Galaxy S2 - Abyss Kernel

[Buddler 1.370]

[KERNEL]Abyss Kernel

Originalthread

Abyss kernel 1.2 Final 2 Stable Version by me for Samsung - MIUI - AOSP - AOKP Rom

Changelog:

Fixed Auto-brightness

Updated usb and otghost driver for USB mouse and keyboard support

max8997: Implement Accessory Charger Adapter support

Issue fixed for frequencies below 800mhz, if set as the maximum frequency

Fixed scaling issue

Updated modem driver to update5 sources

Added tmu sysfs for temperature reading

USB: gadget: f_audio_source: New gadget driver for audio output

Bluetooth: Disconnect ACL after 8sec when no service level connection.

Added mdnie tweaks

Changed in S90Abyss script: GPU clock support: 67-100-114-133-160-200-267-300-400 mhz (If you have the old one, delete it, then install the new one from recovery)

Other small fixes

Abyss kernel 1.0 Stable Version by me for Samsung - MIUI - AOSP - AOKP Rom

Changelog:

Completely rebuilt

All functions of AbyssAosp and AbyssICS kernel

Built from Samsung Sources Update 4

Updated to linux 3.0.32

Linaro arm eabi toolchain 4.7.0

Re-enabled S5PV310 hotplug gb

Re-added ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend

Disabled rwsem XCHGADD algorithm

Disabled Joe's RCU for best stability

Disabled cgroup_timer_slack for best stability

XZ: changed compression values

USB: gadget: f_accessory: Add support for HID input devices

Changed configuration

Fixed vdd_levels interface

mmc: increase mmc read and write timeout

Fixed auto-brightness as stock (if you use S90abyss script, set min_gamma = 1)

mxt224_u1: Fix typo in touch sysfs interface

touchscreen; Update touch values according to power state

mm: adjust vm ratios

usb:gadget:android: avoid sending extra uevents

arch/arm/return_address.c: hide annoying warning

arm: mm: fixing 'offset.un' may be used uninitialized in this function

Changelog:

Abyss Kernel 4.0 ICS

Completely rebuilt

All functions of AbyssAosp kernel

Built from Samsung Sources Update 4

Revert to Linaro arm eabi toolchain 4.7.0

Re-enabled S5PV310 hotplug gb

Re-added ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend

Disabled rwsem XCHGADD algorithm

Disabled Joe's RCU for best stability

Disabled cgroup_timer_slack for best stability

XZ: changed compression values

USB: gadget: f_accessory: Add support for HID input devices

Changed configuration

Fixed vdd_levels interface

mmc: increase mmc read and write timeout

Fixed auto-brightness as stock (if you use S90abyss script, set min_gamma = 1)

mxt224_u1: Fix typo in touch sysfs interface

touchscreen; Update touch values according to power state

mm: adjust vm ratios

usb:gadget:android: avoid sending extra uevents

arch/arm/return_address.c: hide annoying warning

arm: mm: fixing 'offset.un' may be used uninitialized in this function

Abyss Kernel 3.2 ICS

Fixed vdd_levels interface

mmc: increase mmc read and write timeout

Fixed auto-brightness as stock (if you use S90abyss script, set min_gamma = 1)

mxt224_u1: Fix typo in touch sysfs interface

touchscreen; Update touch values according to power state

mm: adjust vm ratios

usb:gadget:android: avoid sending extra uevents

arch/arm/return_address.c: hide annoying warning

arm: mm: fixing 'offset.un' may be used uninitialized in this function

reverted rwsem XCHGADD algorithm

Abyss Kernel 3.1 ICS

ipv6: check return value for dst_alloc

Re-enabled HRTICK

usb: disable parent hub tt detection to get HID devices working

Re-added pegasusq governor

Undervolted LCD regulator

mali: Lower allocation order

u1-otg: disable irqs on dev when otg host is stopped

Added in recovery: Download mode Reset Counter (FOR EMERGENCY ONLY)

Other little fix

Abyss Kernel 3.0 ICS

Update to Linux 3.0.31

2core issue fixed

Re-enabled Joe's RCU

Touchscreen tweaked

Added blink in bln

Modified stand-hotplug

Modified Ondemand Governor for max responsiveness

mmc: unbreak sdhci-esdhc-imx on i.MX25

KVM: unmap pages from the iommu when slots are removed

mach-exynos: clock-exynos4: sync clock related exynos4210 code with update5 sources

EHCI: fix criterion for resuming the root hub

NFSv4: Ensure that the LOCK code sets exception->inode

Removed Cuse module

Abyss Kernel 2.9 ICS

Fixed a potential bug in mm/memblock.c

memblock: Make memblock functions handle overflowing range

memblock: Kill memblock_init()

memblock: Use memblock_reserve() in memblock internal functions

memblock: Implement for_each_free_mem_range()

memblock: Make memblock_alloc_[try_]nid() top-down

memblock: Use round_up/down() instead of memblock_align_up/down()

ld9040: fixed gamma steps

set allocation order to 6 in mali driver

Added two new levels ( 7 in total ) in asv bus table

Added ASV Bus Table Menu in recovery

Abyss Kernel 2.8 ICS

Improved stability and performance

Increased number of gamma levels

Interactive governor : add boost pulse interface

cpufreq: improved frequency regulation based on screen on/off events

lowmemorykiller: convert to use oom_score_adj

lowmemorykiller: remove task handoff notifier

Revert: Added ALLOW_CPU_ALIGNMENT

Disabled HRTICK

Fixed recovery.fstab

Added undervolt GPU code in s90abyss script

Fixed Recovery menu

Fixed random reboot in recovery

Other small fixes

Abyss Kernel 2.7 ICS

MALI: Added 3-step GPU DVFS control

staging: android/lowmemorykiller: No need for task->signal check

staging: android/lowmemorykiller: Do not kill kernel threads

arm: vfp: Fix memory corruption on PM suspend

ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend

BUSFREQ: increased uptheshold

New S90abyss script with support 3-step GPU and Fix CPU UV

Added idle mode menu in recovery

Added 2 Core menu in recovery

-------------------

New S90abyss script (install form recovery)

With these script you can change:

The voltage for each CPU frequency

All work's frequencies, governor, cpu i/o scheduler

Change Gpu frequencies

Change the value of charge current (entered values ​​are the default)

Change the value of Touch Sensitivy

Change The values of gamma levels

2) Open and edit the script with a text editor

3) Save the modified script

4) Copy the script that we use in /system/etc/init.d and insert 777 permissions to script

5) Reboot

S90abyss script is removable from recovery for safety (if you've done wrong values ​​and there are boot issue...)

Abyss Kernel 2.6 ICS

Updated to Linux 3.0.30

ARM: smp: Align secondary_start_kernel with mainline

sched: Cleanup cpu_active madness

ARM: SMP: use a timing out completion for cpu hotplug

Ext4: add FALLOC_FL_NO_HIDE_STALE support

cpufreq_conservative: Bump default frequency step up to 10

Enabled kernel panic timeout

Revert "exynos4: Disable SW downclock in cpuidle"

nohz: Fix stale jiffies update in tick_nohz_restart()

tcp: fix TCP_MAXSEG for established IPv6 passive sockets

Increased auto-brightness

Set GPU level 0 and level 1 freq to 267mhz as default

Enabler logger module on boot for compatibility with some apps

Wifi toggle fix

New Recovery CWM modded by me

New Abyss Scrips for settings uv, asv, CPU frequencies, GPU frequncies, vibrator (removable separately from recovery for safety)

Disabled/Enabled BLN form recovery

Enabled/Disabled AFTR idle from recovery

Enabled/Disabled MC_sched from recovery

Others small Fix

New Abyss Scripts Updated (optional)

https://www.mediafire.com/?bbh0amxj9xr9ne2

In this zip file there are these scripts:

S91asvprofile

S91uvprofile

S92frequency

S93gpu

S94vibr

S95charge

With these scripts you can change:

ASV Table - CPU Voltage Table (See table and guide) ===========================>S91asvprofile script

The voltage for each CPU frequency =====================================>S91uvprofile script

All work's frequencies, governor, cpu i/o scheduler ============================>S92frequency script

Change Gpu frequencies ===========================================>S93gpu script

Change the Max level of the vibration ===================================>S94vibr script

Change the value of charge current (entered values ​​are the default) =================>S95charge script

1) Extract the scripts from zip file

2) Open and edit the scripts with a text editor

3) Save the modified scripts

4) Copy the scripts that we use in /system/etc/init.d and insert 777 permissions to scripts

5) Reboot

S91uvprofile, S91asvprofile, S92gpu, S93vibr are removable from recovery for safety (if you've done wrong values ​​and there are problems to boot)

NOTE: You must use one of two scripts to change the voltages (S91asvprofile or S91uvprofile). Do not use them both together.

Both scripts are set to kernel default values ​​for total compatibility

NB: Dovete usare uno solo dei due script per modificare i voltaggi (S91asvprofile o S91uvprofile) . Non utilizzateli tutti e due insieme.

Entrambi gli script sono impostati ai valori di default per una compatibilità totale

Abyss Kernel 2.5 ICS

exynos4: hotplug: Added Gingerbread legacy hotplug with tegrak 2nd core support

config: Switch to Gingerbread legacy hotplug

Disabled GENTLE_FAIR_SLEEPERS

ashmem: Added cache flush routines to ashmem

ashmem: Fix flush routine of ashmem

Added -fgcse-sm cflag in makefile

Changed to CC_OPTIMIZE_FOR_SIZE

Added Charge Current Interface

Added 2 script (optionals) S91asvscript, S91uvscript

Added in script adjustable vibrate level selection

Added in script bln activation with energy saver

Added in script GPU frequency selection values

Added in script Charge Current secection values

Other small fixes

Abyss Kernel 2.4 ICS

Updated to Linux 3.0.29

Fix for mouse/keyboard otg

NFSD: Added fault injection script

tools: Added byteshift headers for endian access

KVM: drop bsp_vcpu pointer from kvm struct

tools/virtio: stub out strong barriers

lguest: move the lguest tool to the tools directory

Others small fix

Abyss Kernel 2.3 ICS

Added and enabled Joe's RCU

Added and enabled cpu based sync driver

Addeded and enabled synchronization framework

Added poll support for sync

Enabled BCJ filters on SPARC and 32-bit x86

smb136: Removed mach/gpio-p2.h include

arm: removed stale export of 'sha_transform'

Changed configuration

Others small fix

Abyss Kernel 2.2 ICS

Changelog:

Fixed adjustable settings for mdnie

Fixed adjustable gamma levels for lcd

Fixed adjustable vibrator levels

Others small fix

Abyss Kernel 2.1 ICS

Added Linux 3.0.28 patches

Updated mali drivers

Missing irq_enter/irq_exit wrap around ipi_timer() after backporting

Fix sections mismatch

Added input key fix by Tegrak

Decreased interval of suspend_backoff

Fixed Standard profile (Default) with many optimizations for performance and battery

Others small fix

Abyss Kernel 2.0 ICS

Added adjustable settings for mdnie

Added adjustable gamma levels for lcd

Added adjustable vibrator levels

Added several patches for idle

Set initial state for proximity sensor

Modified sio i/o scheduler

Modified interactive governor for add responsiveness at lower frequencies

Modified ondemand governor for add responsiveness at lower frequencies

Fixed rcu stalls on SMP platforms…

Other small fix

S91profile script (updated):

With this script you can change:

ASV Table (See table and guide)

I / O Scheduler

Governor

Min Freq

Max Freq

Min freq suspend

Max freq suspend

The values ​​that can be inserted, are inserted in the script.

Extract the file from the zip and insert it in init.d with 777 permissions

Abyss Kernel 1.8 ICS

Added scaling_min_suspend_freq and scaling_max_suspend_freq modifiable via script

Removed noise microphone to reboot

Enabled GENTLE_FAIR_SLEEPERS

Set CONFIG_FRAME_WARN to 2048

Corrected several warnings

Changed to Linaro 4.7 toolchain

Other small changes

Abyss Kernel 1.7 ICS

• Added asv voltage table elements selectable
  
• Changed asv voltage table
  
• Disabled old s5pv310 pm-hotplug module
  
• Enabled Stochastic Fair Blue NET scheduler
  
• Touch sensibility corrected a bit
  
• Added XXLPS initramfs
  
• Revert to Superuser from Supersu
  
• other small fixes
  

Abyss Kernel 1.6 ICS

• Theme Flash issue fixed
  
• Added and enabled old s5pv310 pm-hotplug module
  
• Touch sensibility increased again
  
• Enabled Logger as module
  
• Fix warnings introduced by enter_cpuidle
  
• Added new netlink msg type for IDLETIMER
  
• Wireless: Decreased event wake_lock timeout to 1500 ms
  
• wireless: Fixed frame sequence lag issue
  
• Added latest adbd
  
• Others small fixes
  

Abyss Kernel 1.5 ICS

• Added ICS 3.0.27 patch
  
• Added intellidemand governor
  
• Added CW Touch recovery 5.5.0.4 v8
  
• Higher touch sensibility when phone charging
  
• Changed GPU clock default to 266Mhz
  
• Changed to Abyssplug as default governor
  
• Changed deadline iosched fifo_batch 16 -> 1
  
• slub: fix a possible memleak in __slab_alloc()
  
• mm: slub: Default slub_max_order to 0
  
• Enabled SLUB
  
• Disableb SW downclock in cpuidle
  
• Others little fix
  

Script for GPU underclock (160-267)

Insert in init.d with 777 permission

---------------------------

AbyssPlus kernel 3.1

Added Voodoo Louder Compatibility

More cpu governor changes, removed obsolete governors

Added idle_notifier support

use RWSEM_XCHGADD_ALGORITHM

Added bfqv3r1 (thanks to Tegrak)

GPU modifications: mali 3-step

Changed Configuration

Others little fix

All functions of AbyssPlus 3.0 kernel

AbyssPlus kernel 3.0

Changed to new workqueue implementation

Updated patches for ARM topology

Enabled Sched_mc

Enabled AFTR CPU idle mode

Enabled cleancache

SIO i/o scheduler default

Some cpu governor modifications

vmscan: prevent background aging of anon page in no swap system

Added in cpuidle :extend cpuidle and menu governor to handle dynamic states

Some unnecessary code cleanups and tweaks

Abyss Kernel 2.3

Inserito fix WiFI

CPUfreq bugfix

Disabilitato Frame point

Cambiato frequenza di wakeup governor SmartassV2

Inserita autocalibrazione batteria al termine della carica

inserito auto-backup cartella EFS inserito in /data/.Thunder

Inserita Recovery CW 5.0.2.6

Altre piccole variazioni

Modificato governor SmartassV2 con inseriti tweaks

Modificato governor OndemandX: inserite le stesse modifiche del governor ondemand, quindi fast start, velocizzata uscita ed entrata in deep sleep

Inserito Touchscreen lock Freq a 500mhz (come nel kernel stock)

Inserita routine suspend_sys_sync per velocizzare le operazioni sui files quando lo schermo è spento

Altre piccole modifiche

L'autocalibrazione viene fatta caricando il device da spento fino al 100%.

Per ripetere il procedimento, dovrà essere cancellato manualmente il file Battery-calibrated in /data/.Thunder affinchè venga rifatta.

Abyss Kernel 1.7

Aggiunta RCU Classica

Introdotte e migliorate alcune macro per memory copy

Disabilitato MALI-400 GPU State Tracking

Rimossa Sync workqueue in wakelock

Velocizzato accesso a cgroupfs

Modificate alcune routines di gestione della mmc

Fissato il problema con alcuni governor nella gestione della massima frequenza.

Altre piccole variazioni.

Abyss Kernel 1.4

Tutte le funzioni disponibili nel kernel Thunderbolt 3.1

Aggiornata base a 2.6.35.13

Importato tweak risparmio batteria da Abyss kernel per aosp

Inserito trick che tiene sotto controllo il Deep sleep e lo forza dopo ogni 5 sec.

Inserito un controllo del cambio di governor durante un cambio di stato

Cambiate frequenze base 200 e 400 Mhz a 150 e 300Mhz per ulteriore risparmio batteria

Fissato problema freeze e ravvii del kernel Abyss 1.1

Cambiata ottimizzazione del kernel

Impostazione voltaggi usati da angelom (ATTENZIONE, questi voltaggi sono puramente indicativi e può essere necessario alzarli di 25mv):

150Mhz-------------825mv

300Mhz-------------850mv

500Mhz-------------875mv

600Mhz-------------900mv

800Mhz-------------950mv

900Mhz------------1000mv

1000Mhz-----------1100mv

1200Mhz-----------1250mv

Thunderbolt Kernel 3.1:

Fissato il problema delle chiamate e freeze

Cambiata sensibilità Touchscreen

Cambiati i livelli della luminosità

Aggiunto di default BFS cpu scheduler

Inserita patch EXT4

Aggiunta RCU classica

Cambiate opzioni di ottimizzazione

Thunderbolt Kernel 3.0:

Cambiati i livelli della luminosità

Aggiunto di default BFS cpu scheduler

Inserita patch EXT4

Aggiunta RCU classica

Cambiate opzioni di ottimizzazione

Thunderbolt Kernel 2.4

Aggiunto smartass governor

Aggiunto V® i/o scheduler

Fissato il deep sleep

Aggiornata initramfs alla versione XXKH3

Riaggiunta Recovery CW 4.0.1.4

Modificate frequenze (ora disponibili: 1536, 1400, 1304, 1200, 1100, 1000, 900, 800, 600, 500, 400, 200)

Inserito ReadAhead tweak

Aggiornato JHash alla versione 3

Inseriti small Tweaks in Conservative e Ondemand Governor

Modificata nitidezza e colori

Modificato valore fix multitouch

Thunderbolt Kernel 2.0

Basato su Samsung kernel Source Update2 (XXKG5)

Abilitato ThumbEE

Abilitato di Default il BFQ V2 R1 i/o scheduler (possibili noop, deadline, cfq, bfq)

Possibilità di overclock e undervolt cpu con Setcpu (fino a 1600MHZ)

Tavola Voltaggi modificabile tramite Setcpu (fino a 1,5 volt), i voltaggi di default sono standard

Abilitato BLN (attivabile tramite l'applicazione BLN Control)

Attivato Interactive Governor

Inseriti: Modulo cifs.ko, tun.ko, fuse.ko, ntfs.ko, nls_utf8.ko

SLQB Allocator patch

Fix Multitouch

Modificato valore battery polling

Aggiunto custom boot screen

Modificata Tavola Gamma

Inserita initramfs XXKG6

Inseriti Memory e Battery Tweak

Aggiunta possibilità modifica clock GPU

Ottimizzazione configurazione

NB: Per l'undervolt procedete con diminuzioni di 0.25mv alla volta perchè la CPU potrebbe risentire di diminuzioni drastiche dei voltaggi! Appena avvertite un pò di instabilità o avete qualche Force Close rialzate la frequenza!

Alla fine troverete una configurazione stabile per il vostro terminale! La batteria ne gioverà!

[MOD] BLN funzionante con app SMS stock per KG6:

ONE.PT.XXKG6.Services.Patch.BLN.zip (flashabile da Recovery)

Download

Abyss kernel 1.2 Final 2 MIUI - AOSP - AOKP Rom

Abyss kernel 1.0 MIUI - AOSP - AOKP Rom

-----------------

Abyss Kernel 4.0 ICS

Abyss Kernel 3.2 ICS

Abyss Kernel 3.1 ICS CWM

Abyss Kernel 3.1 ICS Odin

Abyss Kernel 3.0 ICS

Abyss Kernel 3.0 ICS New Logo Version

Abyss Kernel 2.9 ICS

Abyss Kernel 2.8 ICS

Abyss Kernel 2.7 ICS

Abyss Kernel 2.6 ICS

Abyss Kernel 2.5 ICS

Abyss Kernel 2.4 ICS

Abyss Kernel 2.3 ICS

Abyss Kernel 2.2 ICS

Abyss Kernel 2.1 ICS

Abyss Kernel 2.0 ICS

Abyss Kernel 1.8 ICS

Abyss Kernel 1.7 ICS

Abyss Kernel 1.6 ICS

Abyss Kernel 1.5 ICS

-----------------

AbyssPlus Kernel 3.1 Sources

Abyss Plus 3.0 Kernel Sources

Abyss Kernel 2.3 by angelom (falshabile da Recovery)

Thunderbolt Kernel 3.1 by angelom (falshabile da Recovery)

bearbeitet May 27, 2012 von Buddler

[Guest mkh910970]

Es gibt den Abyss 2.4 >> https://www.multiupload.com/9IQMIS5KQI

(link aus dem xda forum -- Batista70 Foxhound Edition ROM >https://forum.xda-developers.com/showthread.php?t=1162715&page=713)

Changelog

Fixed USB problem for Rom AOSP

Improved stability

Added fix WiFi

CPUfreq bugfix

Frame Off Point

Changed frequency wakeup governor SmartassV2

Added auto-calibration battery charging is complete

inserted auto-backup folder was added to EFS / data / .Thunder

Added Recovery 5.0.2.6 CW

Other small changes

Modified with added tweaks governor SmartassV2

Modified governor OndemandX: Enter the same changes to the ondemand governor, then start fast, accelerated entry into and exit from deep sleep

Posted touchscreen lock Freq to 500MHz (as in the stock kernel)

Added suspend_sys_sync routines to speed up operations on the files when the screen is off

Other minor changes

[dj.fritte 76]

Hallo,

habe seit 5 Tagen den Abyss+ Kernel 2.4 als Test und muss ich sagen, dass ich begeistert bin- lange Akku Laufzeit (ca. 30Std), sehr füssig, keine Hänger.

Für mich vergleichbar mit den (guten) versionen von Siyah.

Wunderschönes Boot Logo, was vielleicht nicht soo wichtig ist ))

gruss

dj.fritte

[Buddler 1.370]

Update AbyssPlus kernel 3.1

[nixmomo 839]

Moin,

wirklich floter Kernel aber da er kein NTFS Support hat fällt er für mich leider raus. Oder hat jemand die Source vom Kernel??

MfG

[Buddler 1.370]

Update Abyss Kernel 1.6 ICS

[Guest mkh910970]

Changelog:

Added asv voltage table elements selectable

Changed asv voltage table

Disabled old s5pv310 pm-hotplug module

Enabled Stochastic Fair Blue NET scheduler

Touch sensibility corrected a bit

Added XXLPS initramfs

Revert to Superuser from Supersu

other small fixes

Original-thread + download:

https://www.nonsolosmartphone.it/abyssics-kernel-t133.html

[freak002 4]

Update auf 1.8

https://www.nonsolosmartphone.it/abyssics-kernel-t133.html

Changelog 1.8 Stable:

Added scaling_min_suspend_freq and scaling_max_suspend_freq modifiable via script

Removed noise microphone to reboot

Enabled GENTLE_FAIR_SLEEPERS

Set CONFIG_FRAME_WARN to 2048

Corrected several warnings

Changed to Linaro 4.7 toolchain

Other small changes

[Buddler 1.370]

Update Abyss ICS kernel 2.0 Stable Version

[ockaiser33 2]

2.1 ist da

Lg

[Guest mkh910970]

Na, ein bisserl mehr Info wär schon nicht schlecht.. Also:

https://www.mediafire.com/?iu515t11tyyvxg9

Changelog:

Added Linux 3.0.28 patches

Updated mali drivers

Missing irq_enter/irq_exit wrap around ipi_timer() after backporting

Fix sections mismatch

Added input key fix by Tegrak

Decreased interval of suspend_backoff

Fixed Standard profile (Default) with many optimizations for performance and battery

Others small fix

[ockaiser33 2]

v2.1

Na, ein bisserl mehr Info wär schon nicht schlecht.. Also:

sorry @mkh910970 ,

Für mich vergleichbar mit Siyah,

sehr füssig, keine Hänger.lange Akku Laufzeit..... und das Handy wirt nicht so heiss.

Voll Stabil 25-1600 MHZ , hir ein parr bilder.

[Guest mkh910970]

Abyss ICS kernel 2.2 Stable Version by me for Samsung Rom

https://www.mediafire.com/?9eaqyfbr092b038

Changelog:

Fixed adjustable settings for mdnie

Fixed adjustable gamma levels for lcd

Fixed adjustable vibrator levels

Others small fix

####################################################################################

Habe ich gerade gefunden -- es gibt auch einen Abyss für MIUI, AOSP, AOKP, CM9!

AbyssAOSP kernel 1.0 R5 Final Stable Version by me

https://www.nonsolosmartphone.it/abyssaosp-ics-kernel-t488.html

Download:

https://www.mediafire.com/?rmjvf1628dcwpyc

Changelog:

All functions of AbyssICS kernel 2.2

Works with all aosp rom (CM9, MIUI, AOKP, ecc)

(For changelog see Changelog 2.2 AbyssICS kernel for Samsung Rom and olders) -- oder siehe oben..^^

https://www.nonsolosmartphone.it/abyssics-kernel-for-samsung-rom-t133.html

[ockaiser33 2]

Abyss ICS kernel 2.3 Stable Version by me for Samsung Version by me for Samsung Rom Rom

https://www.mediafire.com/?uurg5jk1jare7ea https://www.mediafire.com/?uurg5jk1jare7ea

Changelog: Changelog:

Added and enabled Joe's RCU Added and enabled Joe's RCU Added and enabled cpu based sync driver Added and enabled cpu based sync driver Addeded and enabled synchronization framework Addeded and enabled synchronization framework Added poll support for sync Added poll support for sync Enabled BCJ filters on SPARC and 32-bit x86 Enabled BCJ filters on SPARC and 32-bit x86 smb136: Removed mach/gpio-p2.h include smb136: Removed mach/gpio-p2.h include arm: removed stale export of 'sha_transform' arm: removed stale export of 'sha_transform' Changed configuration Changed configuration Others small fix

[Buddler 1.370]

Update Abyss Kernel 2.4 ICS

[Guest mkh910970]

Abyss ICS kernel 2.5 Stable Version by me for Samsung Rom

https://www.mediafire.com/?n5a3fmq479s1w4u

Changelog:

exynos4: hotplug: Added Gingerbread legacy hotplug with tegrak 2nd core support

config: Switch to Gingerbread legacy hotplug

Disabled GENTLE_FAIR_SLEEPERS

ashmem: Added cache flush routines to ashmem

ashmem: Fix flush routine of ashmem

Added -fgcse-sm cflag in makefile

Changed to CC_OPTIMIZE_FOR_SIZE

Added Charge Current Interface

Added 2 script (optionals) S91asvscript, S91uvscript

Added in script adjustable vibrate level selection

Added in script bln activation with energy saver

Added in script GPU frequency selection values

Added in script Charge Current secection values

Other small fixes

AbyssAOSP kernel 1.3 Stable Version by me

https://www.mediafire.com/?onoot392193cce9

Changelog:

Compatibility with CM9 25/04

exynos4: hotplug: Added Gingerbread legacy hotplug with tegrak 2nd core support

config: Switch to Gingerbread legacy hotplug

Disabled GENTLE_FAIR_SLEEPERS

ashmem: Added cache flush routines to ashmem

ashmem: Fix flush routine of ashmem

Added -fgcse-sm cflag in makefile

Changed to CC_OPTIMIZE_FOR_SIZE

Added Charge Current Interface

Added 2 script (optononals) S91asvscript, S91uvscript

Added in script adjustable vibrate level selection

Added in script bln activation with energy saver

Added in script GPU frequency selection values

Added in script Charge Current secection values

Other small fixes

[Guest mkh910970]

Abyss ICS kernel 2.6 Stable Version by me for Samsung Rom

https://www.mediafire.com/?ou190t25mp7kmem

Changelog:

Updated to Linux 3.0.30

ARM: smp: Align secondary_start_kernel with mainline

sched: Cleanup cpu_active madness

ARM: SMP: use a timing out completion for cpu hotplug

Ext4: add FALLOC_FL_NO_HIDE_STALE support

cpufreq_conservative: Bump default frequency step up to 10

Enabled kernel panic timeout

Revert "exynos4: Disable SW downclock in cpuidle"

nohz: Fix stale jiffies update in tick_nohz_restart()

tcp: fix TCP_MAXSEG for established IPv6 passive sockets

Increased auto-brightness

Set GPU level 0 and level 1 freq to 267mhz as default

Enabler logger module on boot for compatibility with some apps

Wifi toggle fix

New Recovery CWM modded by me

New Abyss Scrips for settings uv, asv, CPU frequencies, GPU frequncies, vibrator (removable separately from recovery for safety)

Disabled/Enabled BLN form recovery

Enabled/Disabled AFTR idle from recovery

Enabled/Disabled MC_sched from recovery

Others small Fix

-------------------

New Abyss Scripts Updated (optional)

https://www.mediafire.com/?kmco81u794dp1t9

In this zip file there are these scripts:

S91asvprofile

S91uvprofile

S92frequency

S93gpu

S94vibr

S95charge

With these scripts you can change:

ASV Table - CPU Voltage Table (See table and guide) ===========================>S91asvprofile script

The voltage for each CPU frequency =====================================>S91uvprofile script

All work's frequencies, governor, cpu i/o scheduler ============================>S92frequency script

Change Gpu frequencies ===========================================>S93gpu script

Change the Max level of the vibration ===================================>S94vibr script

Change the value of charge current (entered values ​​are the default) =================>S95charge script

1) Extract the scripts from zip file

2) Open and edit the scripts with a text editor

3) Save the modified scripts

4) Copy the scripts that we use in /system/etc/init.d and insert 777 permissions to scripts

5) Reboot

S91uvprofile, S91asvprofile, S92gpu, S93vibr are removable from recovery for safety (if you've done wrong values ​​and there are problems to boot)

NOTE: You must use one of two scripts to change the voltages (S91asvprofile or S91uvprofile). Do not use them both together.

Both scripts are set to kernel default values ​​for total compatibility

AbyssAOSP kernel 1.4b Stable Version by me

https://www.mediafire.com/?q4zd40z1jqd3sn4

Changelog:

Updated to Linux 3.0.30

Cleanup and align with CM9

ARM: smp: Align secondary_start_kernel with mainline

sched: Cleanup cpu_active madness

ARM: SMP: use a timing out completion for cpu hotplug

Ext4: add FALLOC_FL_NO_HIDE_STALE support

cpufreq_conservative: Bump default frequency step up to 10

Enabled kernel panic timeout

Revert "exynos4: Disable SW downclock in cpuidle"

nohz: Fix stale jiffies update in tick_nohz_restart()

tcp: fix TCP_MAXSEG for established IPv6 passive sockets

Increased auto-brightness

Set GPU level 0 and level 1 freq to 267mhz as default

Enabled logger module on boot for compatibility with some apps

Wifi toggle fix

New Recovery CWM modded by me

New Abyss Scrips for settings uv, asv, CPU frequencies, GPU frequncies, vibrator (removable separately from recovery for safety)

Disabled/Enabled BLN form recovery

Enabled/Disabled AFTR idle from recovery

Enabled/Disabled MC_sched from recovery

Removed CWM app for incompatibility with CM

Others small Fix

[ockaiser33 2]

https://www.mediafire.com/?59oa0hah1cefyyd

Abyss ICS kernel 2.6 Final Stable Version by me for Samsung Romhttps://www.mediafire.com/?59oa0hah1cefyydChangelog:Updated to Linux 3.0.30ARM: smp: Align secondary_start_kernel with mainlinesched: Cleanup cpu_active madnessARM: SMP: use a timing out completion for cpu hotplugExt4: add FALLOC_FL_NO_HIDE_STALE supportcpufreq_conservative: Bump default frequency step up to 10Enabled kernel panic timeoutRevert "exynos4: Disable SW downclock in cpuidle"nohz: Fix stale jiffies update in tick_nohz_restart()tcp: fix TCP_MAXSEG for established IPv6 passive socketsIncreased auto-brightnessSet GPU level 0 and level 1 freq to 267mhz as defaultEnabler logger module on boot for compatibility with some appsWifi toggle fixFix Touchkey lightsNew Recovery CWM modded by meRemoved Old Abyss ScriptDisabled/Enabled BLN form recoveryEnabled/Disabled AFTR idle from recoveryEnabled/Disabled MC_sched from recoveryAdded in recovery Root installerAdded in recovery S90Abyss Script installer (With all functions of old Abyss script, + added Gamma level settings, Touch Sensivity settings)Added in recovery S90 Abyss Script removeYou can select ASV CPU Table in recovery (Default = 3)Yoy can select Vibration Level in recovery (Default = 6)Others small Fix-------------------New S90abyss script (install form recovery)With these script you can change:The voltage for each CPU frequencyAll work's frequencies, governor, cpu i/o schedulerChange Gpu frequenciesChange the value of charge current (entered values ​​are the default)Change the value of Touch SensitivyChange The values of gamma levels2) Open and edit the script with a text editor3) Save the modified script4) Copy the script that we use in /system/etc/init.d and insert 777 permissions to script5) RebootS90abyss script is removable from recovery for safety (if you've done wrong values ​​and there are boot issue...)

[Buddler 1.370]

Update Abyss Kernel 2.7 ICS

[Guest mkh910970]

https://www.nonsolosmartphone.it/abyssaosp-ics-kernel-t488.html

https://www.mediafire.com/?55uwoqclcuk33bc

Changelog:

MALI: Added 3-step GPU DVFS control

staging: android/lowmemorykiller: No need for task->signal check

staging: android/lowmemorykiller: Do not kill kernel threads

arm: vfp: Fix memory corruption on PM suspend

ARM: vfp: only clear vfp state for current cpu in vfp_pm_suspend

BUSFREQ: increased uptheshold

New S90abyss script with support 3-step GPU and Fix CPU UV

Added idle mode menu in recovery

Added 2 Core menu in recovery

NOTE:

With S90Abyss Script Enabled, Boot time is longer, because script is bigger

https://www.mediafire.com/?55uwoqclcuk33bc