SGH-X660 Simlock

[ronny2005 0]

Das Samsung SGH-X660 meiner frau ist warscheinlich mit einem Code versehen, der es nur zulässt D1 Karten zu benutzen. Jetzt hat sie aber eine D2 Karte und will ihr Handy behalten. Kann man da irgendetwas machen ??? Es kommt die Fehlermeldung falsche Karte, wen man die D2 einsteckt !!!!

MfG Ronny

[Guest Gastum]

wie wärs mit einem unlock (eingriff in deutschland illegal und die garantie is flöten)

[ronny2005 0]

habe es jetzt mit siesem *# code gemacht, aber wenn Handy aus und wieder an das gleiche spiel !! Garantie egal !!

mfg ronny:cool:

[Guest Gastum]

also laut anderen foren soll der code fürs X600 funktionieren. zwar nur n tempor#rer das du nur 2 karten nutzen kannst aber sollte für deine zwecke genügen

###### Please be aware that you use these codes at your own risk, this is just a list of codes from various sources that have worked in the past. ####

Do not ask for codes in this thread

Most Motorola's , LG's , most new Samsungs, Sony Ericssons cannot be unlocked by code and need to be unlocked by direct cable or clip in a shop.

If there is not a code listed for your phone below then there is NO free way to unlock it, you need to find a shop or Market Stall to do it for you

How To Unlock NEC E525 + E515 + E530 (with thanks to Ali's Knowledge Base)

To View the original article please follow this link to Ali's Website here

So you have bought yourself a cracking phone and you want to unlock it to all networks (this method is confirmed working in the USA for both phones using the second command below) .

1. Obtain the NEC usb drivers from HERE

2. Buy yourself a NEC usb cable HERE

3. Get yourself the excellent Nectalk from HERE

4. Install drivers and plug the phone in. Your OS will go through the new device installation.

5. Once all installed, go to the directory where you have unzipped Nectalk and type

nectalk -pt pte 10079 unlock (for O2 uk )

or for other networks just type nectalk -pt unlock

The software will connect to the phone and then reboot it.

Once rebooted your phone will be fully unlocked.

Other Models Unlock codes

SOME OF THESE CODES ONLY WORK ON EARLIER MODELS

For Model:

Samsung D500

Switch phone on without sim and enter :-

#*7337#

if it does not work then you need a direct unlock in a shop

Samsung A300

*2767*637#

Model: Samsung A400

*2767*637#

Model: Samsung A800

*2767*637#

Model: Samsung E500

*2767*688#

In newer phones:

#*7337#

Model: Samsung E700

*2767*688#

In newer phones:

#*7337#

Model: Samsung E715

Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.

In newer phones:

#*7337#

Model: Samsung M100

Type *#9998*627837793#. Then type *#9998*737#. Press >/[] (Play Stop) until phone shows NCK/SPCK number. Press Exit. Type #0111*CODE# (Code is the last 8 digits of the NCK/SPCK)

Model: Samsung P400

*2767*3855#

In newer phones:

*2767*927#

Model: Samsung S100

*2767*7822573738#

Model: Samsung S105

Remove Simcard. Enter *2767*7822573738# and after phone reboots, enter #0111*00000000#

Model: Samsung S300

*2767*7822573738#

Model: Samsung S307

Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.

In newer phones:

#*7337#

Model: Samsung S500

*2767*3855#

In newer phones:

*2767*927#

Model: Samsung SGH600

*2767*3855#

*2767*2878#

Model: Samsung SGH2100

*2767*3855#

*2767*2878#

Model: Samsung V200

*2767*7822573738#

Model: Samsung X100

Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.

In newer phones:

#*7337#

Model: Samsung X600

Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.

In newer phones:

#*7337#

Model: Samsung Universal

TEMPORARY UNLOCK:

Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. You will get a new menu. Select Malloc Fail.

In newer phones:

#*7337#

[Guest Gastum]

V200 unlocking procedure if the other code doesnt work

Enter each line and wait for handset to fully reboot before entering the codes on the next line.

After the last set of codes have been entered the handset will be unlocked - BUT REMEMBER - back up your phone book etc first!!

*2767*63342#

*2767*3855#

*2767*2878#

*2767*927#

*2767*7822573738#

-----------------------------------

Samsung X450

1) note handset imei

2) insert the card you want to use in your handset and switch on

3) at wrong card enter *2767*688xxxxxxxxxxxxxxx#

(xxxxxxxxxxxxxxx = handset imei number)

4) after reboot your sim will work, BUT not after power down

now the trick:

5) enter *0141#

6) press call (green) button

7) now simlock updated to current network

---------------------------------------

E700

If the other two solutions has failed to remove the lock on your handset it is possible that your handset

may have a second security lock.

This extra lock is placed on certain Samsung handsets and unfortunately it’s impossible to know this before hand.

However here is another solution which you can try.

Power on the mobile phone without SIM card inside and type these codes:

*2767*63342# and press green button

*2767*3855# and press green button

*2767*2878# and press green button

*2767*927# and press green button

*2767*7822573738# press green button

----------------------------------------------

E710

not tested by me

1 Put in your simcard and switch on

2 Unlock with *2767*688 followed by your imei

3 After the reboot try *0141# then GREEN Button

4 *#06# to show your imei nr.

Hope this works it did for me! If you dont do point 3 before you turn your phone off it will go back to original state! Not unlocked any networks

---------------------------------------------------------

panasonic g50

1-Power on phone without simcard.

2-put **00012*00000000# The phone says invalid password.

3-do same operation maybe six time or seven time until the phone says blocked

4 put **00032*00000000# The phone says invalid password.

5-do same operation maybe six time or seven time until the phone says blocked

6- switch phone off and insert sim of choice

-----------------------------------------------

samsung c100

**Stage I**

type: "*#9998*627837793#"

wait till error message dissapears

**Stage II**

type: "*#9998*3323#"

press "Exit" and then press 7

*the phone will reboot*

**Stage III**

*now the phone will turn on like it would if it was unlocked*

type:*#9998*627837793#

wait till error message dissapears

**Stage IV**

then navigate in menu to 4.2.4 (4. Settings, 2. My Settings, 4. File Manager)

then execute menu item 4 (initialize) and 6 (recover).

Then the phone will be totally unlocked. If you don't follow stage III and IV, after you turn your phone off, and then back on, it will be once again locked, so, do not forget to follow the last 2 stages

FYI, there's an alpha version of a free Orange c500 sim unlocker on Modacos forums.

I've just unlocked 2 phones.

Follow the instructions closely.

Get the Certificate Security on the phone disabled:

https://developer.orangews.com/orgspv/comdefq.aspx

Then download the software on Modacos:

https://www.modaco.com/index.php?showtopic=207545

Transfer the .cab file to your phone, only AFTER Certificate Security Disabling

Install the cab. (doubleclick it)

Then run the unlocker on your pc : SPVServices.exe

Be aware, this is at the alpha stage, if it screws up your phone, you're on your own.

Passed to me by Browntoa for adding to this thread and thanks to Chuffy for sending to Browntoa

Some time I asked you how to unlock a Z500 - well I've found the answer without cables etc

Copied from mobile-review.com forums

Follow the instruktions the you will have a unlocked Z500!

1- Enter code *7465625*28782# without a sim in the phone

2- Phone will display "Auto Subset Lock: Activated!"

3- Enter code *7465625*28638# without a sim again

3- Phone will display "Auto Network Lock: Activated!"

4- Now insert the sim and enjoy! Phone is Unlocked!

It really works too.

You're welcome to keep it for others.

[Guest Gastum]

Models Z105, Z107v, Z500, Z500V,

Power on your phone

1- Enter code *7465625*28782# without a sim in the phone

2- Phone will display "Auto Subset Lock: Activated!"

3- Enter code *7465625*28638# without a sim again

3- Phone will display "Auto Network Lock: Activated!"

4- Now insert the sim and enjoy! Phone is Unlocked!

(NOTE: When you change sim to other operator repeat this process to unlock it for that operator also)

***Would all users please remember you use these codes at your own risk, thank you Board Guide***

[ronny2005 0]

musss man jetzt ein Update oder so machen oder geht es auch mit einem Code kommplett auf ?? Habe es jetzt mit MalocFile gemacht !!! Bei Nokia kann mann es ja mit diesem langen Code aufmachen. So auch bei Samsung ???

Danke vielmals MfG Ronny:icon_cool

[Guest Gastum]

wenn du lesen würdest (der erste satz nach deinem beitrag) wüsstest du es.

es ist ein temporärer unlock

[djonka 0]

Ich bedanke mich für diese codes. Hat mir sehr geholfen:icon_wink

[Guest Gastum]

bitte sehr